Rapid EqualLogic Configuration Portal by SIS
The Dell Rapid EqualLogic Configuration Series of documents is intended to assist users in deploying EqualLogic iSCSI SAN solutions. The following documents employ tested and proven, Dell best practices for EqualLogic SAN environments. Use the links in each appropriate section to obtain the latest host, switch, and array configuration guides that pertain to your system (latest revision dates shown in parentheses).
To configure a Windows system a document from every section is needed; a system running VMware requires a document from every section except section 2.
Full product documentation can be found at https://support.equallogic.com/secure/login.aspx
--Note: This site is for registered EqualLogic customers and requires a login. If you do not already have a login, click Create Account on the site linked above.--
Configuration steps should be completed in order as numbered below:
- PowerConnect 6224 or 6248 (Sept 2012)
- PowerConnect 7024/7048 (June 2012)
- PowerConnect 8024 or 8024F (February 2013)
- PowerConnect 8132(F) or 8164(F) (November 2012)
- Force10 S25N/S50N (June 2012)
- Force10 S55 (July 2012)
- Force10 S60 (June 2012)
- Force10 S4810 (February 2013)
- Force10 S4820T (February 2013)
- Cisco 3750X (February 2013)
- Array configuration (December 2012)
- Windows 2008 R2 (December 2012)
- Windows 2012 (December 2012)
- ESXi 4.1 (December 2012)
- ESXi 5.1 (December 2012)
- Installing SAN HQ and Dell Lasso (August 2012)
IMPORTANT! Contact Dell support (EqualLogic support site) when:
- Deployment is complete to finalize your remote deployment and configuration checklist, or
- If there are any questions about your EqualLogic iSCSI SAN configuration.
The Storage and Infrastructure Solutions team would appreciate feedback pertaining to the documentation found here. Please email us at SISfeedback@dell.com.
Additional Dell Storage documentation: